From b2240ff6f00bf1cdb0db342ac182b672f039fe3b Mon Sep 17 00:00:00 2001
From: jsm28 <jsm28@138bc75d-0d04-0410-961f-82ee72b054a4>
Date: Thu, 24 Mar 2011 16:49:56 +0000
Subject: [PATCH] * configure.ac (i[[3456789]]86-*-vsta,
i[[3456789]]86-*-go32*, i[[3456789]]86-*-beos*, powerpc-*-beos*,
m68k-hp-hpux*, m68k-apollo-sysv*, m68k-apollo-bsd*, m88k-dg-dgux*,
m88k-harris-cxux*, m88k-motorola-sysv*, mips*-dec-ultrix*,
mips*-nec-sysv4*, mips*-sgi-irix4*, mips*-*-sysv4*, mips*-*-sysv*,
i370-ibm-opened*, i[[3456789]]86-*-sysv5*, i[[3456789]]86-*-dgux*,
i[[3456789]]86-ncr-sysv4.3*, i[[3456789]]86-ncr-sysv4*,
i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*, i[[3456789]]86-*-udk*,
vax-*-ultrix2*, m68k-sun-sunos*, hppa*-*-hiux*, *-*-hiux*,
rs6000-*-lynxos*, *-*-sysv4*, *-*-rhapsody*): Remove host cases. *
configure: Regenerate.
config:
* mh-cxux, mh-decstation, mh-dgux386, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-sysv5: Remove.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@171412 138bc75d-0d04-0410-961f-82ee72b054a4
---
ChangeLog | 15 +++++
config/ChangeLog | 5 ++
config/mh-cxux | 5 --
config/mh-decstation | 3 -
config/mh-dgux386 | 5 --
config/mh-lynxrs6k | 2 -
config/mh-ncr3000 | 4 --
config/mh-necv4 | 4 --
config/mh-sco | 4 --
config/mh-sysv5 | 4 --
configure | 134 ++-----------------------------------------
configure.ac | 134 ++-----------------------------------------
12 files changed, 28 insertions(+), 291 deletions(-)
delete mode 100644 config/mh-cxux
delete mode 100644 config/mh-decstation
delete mode 100644 config/mh-dgux386
delete mode 100644 config/mh-lynxrs6k
delete mode 100644 config/mh-ncr3000
delete mode 100644 config/mh-necv4
delete mode 100644 config/mh-sco
delete mode 100644 config/mh-sysv5
diff --git a/ChangeLog b/ChangeLog
index 9ee9c9d67efe..570fef5c2d25 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,18 @@
+2011-03-24 Joseph Myers <joseph@codesourcery.com>
+
+ * configure.ac (i[[3456789]]86-*-vsta, i[[3456789]]86-*-go32*,
+ i[[3456789]]86-*-beos*, powerpc-*-beos*, m68k-hp-hpux*,
+ m68k-apollo-sysv*, m68k-apollo-bsd*, m88k-dg-dgux*,
+ m88k-harris-cxux*, m88k-motorola-sysv*, mips*-dec-ultrix*,
+ mips*-nec-sysv4*, mips*-sgi-irix4*, mips*-*-sysv4*, mips*-*-sysv*,
+ i370-ibm-opened*, i[[3456789]]86-*-sysv5*, i[[3456789]]86-*-dgux*,
+ i[[3456789]]86-ncr-sysv4.3*, i[[3456789]]86-ncr-sysv4*,
+ i[[3456789]]86-*-sco3.2v5*, i[[3456789]]86-*-sco*,
+ i[[3456789]]86-*-udk*, vax-*-ultrix2*, m68k-sun-sunos*,
+ hppa*-*-hiux*, *-*-hiux*, rs6000-*-lynxos*, *-*-sysv4*,
+ *-*-rhapsody*): Remove host cases.
+ * configure: Regenerate.
+
2011-03-24 Joseph Myers <joseph@codesourcery.com>
* configure.ac (ppc*-*-pe): Remove host case.
diff --git a/config/ChangeLog b/config/ChangeLog
index 2d8d573ba255..29dee03d1e07 100644
--- a/config/ChangeLog
+++ b/config/ChangeLog
@@ -1,3 +1,8 @@
+2011-03-24 Joseph Myers <joseph@codesourcery.com>
+
+ * mh-cxux, mh-decstation, mh-dgux386, mh-lynxrs6k, mh-ncr3000,
+ mh-necv4, mh-sco, mh-sysv5: Remove.
+
2011-03-05 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Eric Blake <eblake@redhat.com>
diff --git a/config/mh-cxux b/config/mh-cxux
deleted file mode 100644
index 8680654fff81..000000000000
--- a/config/mh-cxux
+++ /dev/null
@@ -1,5 +0,0 @@
-# Configuration for Harris CX/UX 7 (and maybe 6), based on sysv4 configuration.
-
-# The l flag generates a warning from the SVR4 archiver, remove it.
-AR_FLAGS = cq
-
diff --git a/config/mh-decstation b/config/mh-decstation
deleted file mode 100644
index 320927c306a4..000000000000
--- a/config/mh-decstation
+++ /dev/null
@@ -1,3 +0,0 @@
-# for X11, since the native DECwindows include files are really broken when
-# it comes to function prototypes.
-X11_EXTRA_CFLAGS = "-DNeedFunctionPrototypes=0"
diff --git a/config/mh-dgux386 b/config/mh-dgux386
deleted file mode 100644
index b2d2a057b4c9..000000000000
--- a/config/mh-dgux386
+++ /dev/null
@@ -1,5 +0,0 @@
-# The l flag generates a warning from the SVR4 archiver, remove it.
-AR_FLAGS = cr
-
-X11_EXTRA_LIBS = -lnsl
-
diff --git a/config/mh-lynxrs6k b/config/mh-lynxrs6k
deleted file mode 100644
index fac1b973a601..000000000000
--- a/config/mh-lynxrs6k
+++ /dev/null
@@ -1,2 +0,0 @@
-# /bin/sh is too buggy, so use /bin/bash instead.
-SHELL = /bin/bash
diff --git a/config/mh-ncr3000 b/config/mh-ncr3000
deleted file mode 100644
index 7c6ee12739b9..000000000000
--- a/config/mh-ncr3000
+++ /dev/null
@@ -1,4 +0,0 @@
-# Host configuration file for an NCR 3000 (i486/SVR4) system.
-
-# The l flag generates a warning from the SVR4 archiver, remove it.
-AR_FLAGS = cq
diff --git a/config/mh-necv4 b/config/mh-necv4
deleted file mode 100644
index d71805e052aa..000000000000
--- a/config/mh-necv4
+++ /dev/null
@@ -1,4 +0,0 @@
-# Host Makefile fragment for NEC MIPS SVR4.
-
-# NEC -lX11 needs some other libraries.
-X11_EXTRA_LIBS = -lsocket -lnsl
diff --git a/config/mh-sco b/config/mh-sco
deleted file mode 100644
index bf5a807b0e71..000000000000
--- a/config/mh-sco
+++ /dev/null
@@ -1,4 +0,0 @@
-# You may need this if you don't have bison.
-# BISON = yacc -Sm10400
-
-X11_EXTRA_LIBS = -lsocket -lm -lintl -lmalloc
diff --git a/config/mh-sysv5 b/config/mh-sysv5
deleted file mode 100644
index 2e9374c7f96a..000000000000
--- a/config/mh-sysv5
+++ /dev/null
@@ -1,4 +0,0 @@
-# The l flag generates a warning from the SVR4 archiver, remove it.
-AR_FLAGS = cr
-
-X11_EXTRA_LIBS = -lnsl
diff --git a/configure b/configure
index 6b29484d58fa..329efab6ae3f 100755
--- a/configure
+++ b/configure
@@ -2973,10 +2973,7 @@ case "${host}" in
hppa*64*-*-*)
noconfigdirs="$noconfigdirs byacc"
;;
- i[3456789]86-*-vsta)
- noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
- ;;
- i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*)
+ i[3456789]86-*-msdosdjgpp*)
noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
;;
x86_64-*-mingw*)
@@ -2986,18 +2983,12 @@ case "${host}" in
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
;;
- i[3456789]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb"
- ;;
*-*-cygwin*)
noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
;;
*-*-netbsd*)
noconfigdirs="$noconfigdirs rcs"
;;
- powerpc-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
- ;;
esac
@@ -3520,8 +3511,6 @@ case "${target}" in
;;
sh-*-* | sh64-*-*)
case "${host}" in
- i[3456789]86-*-vsta) ;; # don't add gprof back in
- i[3456789]86-*-go32*) ;; # don't add gprof back in
i[3456789]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
@@ -3603,104 +3592,6 @@ tentative_cc=""
host_makefile_frag=/dev/null
if test -d ${srcdir}/config ; then
case "${host}" in
- m68k-hp-hpux*)
- # Avoid "too much defining" errors from HPUX compiler.
- tentative_cc="cc -Wp,-H256000"
- # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
- # If it's HP/UX ar, this should be harmless.
- RANLIB="ar ts"
- ;;
- m68k-apollo-sysv*)
- tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
- ;;
- m68k-apollo-bsd*)
- #None of the Apollo compilers can compile gas or binutils. The preprocessor
- # chokes on bfd, the compiler won't let you assign integers to enums, and
- # other problems. Defining CC to gcc is a questionable way to say "don't use
- # the apollo compiler" (the preferred version of GCC could be called cc,
- # or whatever), but I'm not sure leaving CC as cc is any better...
- #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
- # Used to have BISON=yacc.
- tentative_cc=gcc
- ;;
- m88k-dg-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- ;;
- m88k-harris-cxux*)
- # Under CX/UX, we want to tell the compiler to use ANSI mode.
- tentative_cc="cc -Xa"
- host_makefile_frag="config/mh-cxux"
- ;;
- m88k-motorola-sysv*)
- ;;
- mips*-dec-ultrix*)
- tentative_cc="cc -Wf,-XNg1000"
- host_makefile_frag="config/mh-decstation"
- ;;
- mips*-nec-sysv4*)
- # The C compiler on NEC MIPS SVR4 needs bigger tables.
- tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
- host_makefile_frag="config/mh-necv4"
- ;;
- mips*-sgi-irix4*)
- # Tell compiler to use K&R C. We can't compile under the SGI Ansi
- # environment. Also bump switch table size so that cp-parse will
- # compile. Bump string length limit so linker builds.
- tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
- ;;
- mips*-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- mips*-*-sysv*)
- # This is for a MIPS running RISC/os 4.52C.
-
- # This is needed for GDB, but needs to be in the top-level make because
- # if a library is compiled with the bsd headers and gets linked with the
- # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
- # a different size).
- # ptrace(2) apparently has problems in the BSD environment. No workaround is
- # known except to select the sysv environment. Could we use /proc instead?
- # These "sysv environments" and "bsd environments" often end up being a pain.
- #
- # This is not part of CFLAGS because perhaps not all C compilers have this
- # option.
- tentative_cc="cc -systype sysv"
- ;;
- i370-ibm-opened*)
- tentative_cc="c89"
- ;;
- i[3456789]86-*-sysv5*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[3456789]86-*-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- host_makefile_frag="config/mh-dgux386"
- ;;
- i[3456789]86-ncr-sysv4.3*)
- # The MetaWare compiler will generate a copyright message unless you
- # turn it off by adding the -Hnocopyr flag.
- tentative_cc="cc -Hnocopyr"
- ;;
- i[3456789]86-ncr-sysv4*)
- # for an NCR 3000 (i486/SVR4) system.
- # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
- # This compiler not only emits obnoxious copyright messages every time
- # you run it, but it chokes and dies on a whole bunch of GNU source
- # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
- tentative_cc="/usr/ccs/ATT/cc"
- host_makefile_frag="config/mh-ncr3000"
- ;;
- i[3456789]86-*-sco3.2v5*)
- ;;
- i[3456789]86-*-sco*)
- # The native C compiler botches some simple uses of const. Unfortunately,
- # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
- tentative_cc="cc -Dconst="
- host_makefile_frag="config/mh-sco"
- ;;
- i[3456789]86-*-udk*)
- host_makefile_frag="config/mh-sysv5"
- ;;
i[3456789]86-*-solaris2*)
host_makefile_frag="config/mh-sysv4"
;;
@@ -3736,37 +3627,23 @@ fi
*-interix*)
host_makefile_frag="config/mh-interix"
;;
- vax-*-ultrix2*)
- # The old BSD pcc isn't up to compiling parts of gdb so use gcc
- tentative_cc=gcc
- ;;
*-*-solaris2*)
host_makefile_frag="config/mh-solaris"
;;
- m68k-sun-sunos*)
- # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
- # without overflowing the jump tables (-J says to use a 32 bit table)
- tentative_cc="cc -J"
- ;;
hppa*-hp-hpux10*)
tentative_cc="cc -Wp,-H256000"
host_makefile_frag="config/mh-pa-hpux10"
;;
- hppa*-hp-hpux* | hppa*-*-hiux*)
+ hppa*-hp-hpux*)
tentative_cc="cc -Wp,-H256000"
host_makefile_frag="config/mh-pa"
;;
hppa*-*)
host_makefile_frag="config/mh-pa"
;;
- *-hp-hpux* | *-*-hiux*)
+ *-hp-hpux*)
tentative_cc="cc -Wp,-H256000"
;;
- rs6000-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/usr/cygnus/progressive/bin/gcc"
- host_makefile_frag="config/mh-lynxrs6k"
- ;;
*-*-darwin*)
host_makefile_frag="config/mh-darwin"
;;
@@ -3780,9 +3657,6 @@ fi
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
;;
- *-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
# This is placed last to prevent interfering with the cases above.
i[3456789]86-*-*)
# Build the stage2 and stage3 compilers with -fomit-frame-pointer.
@@ -7076,7 +6950,7 @@ esac
# Decide which environment variable is used to find dynamic libraries.
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
- *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
diff --git a/configure.ac b/configure.ac
index 8b5e7260610a..f2dc7b7c90fc 100644
--- a/configure.ac
+++ b/configure.ac
@@ -429,10 +429,7 @@ case "${host}" in
hppa*64*-*-*)
noconfigdirs="$noconfigdirs byacc"
;;
- i[[3456789]]86-*-vsta)
- noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
- ;;
- i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
+ i[[3456789]]86-*-msdosdjgpp*)
noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
;;
x86_64-*-mingw*)
@@ -442,18 +439,12 @@ case "${host}" in
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
;;
- i[[3456789]]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb"
- ;;
*-*-cygwin*)
noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
;;
*-*-netbsd*)
noconfigdirs="$noconfigdirs rcs"
;;
- powerpc-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
- ;;
esac
@@ -966,8 +957,6 @@ case "${target}" in
;;
sh-*-* | sh64-*-*)
case "${host}" in
- i[[3456789]]86-*-vsta) ;; # don't add gprof back in
- i[[3456789]]86-*-go32*) ;; # don't add gprof back in
i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
@@ -1049,104 +1038,6 @@ tentative_cc=""
host_makefile_frag=/dev/null
if test -d ${srcdir}/config ; then
case "${host}" in
- m68k-hp-hpux*)
- # Avoid "too much defining" errors from HPUX compiler.
- tentative_cc="cc -Wp,-H256000"
- # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
- # If it's HP/UX ar, this should be harmless.
- RANLIB="ar ts"
- ;;
- m68k-apollo-sysv*)
- tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
- ;;
- m68k-apollo-bsd*)
- #None of the Apollo compilers can compile gas or binutils. The preprocessor
- # chokes on bfd, the compiler won't let you assign integers to enums, and
- # other problems. Defining CC to gcc is a questionable way to say "don't use
- # the apollo compiler" (the preferred version of GCC could be called cc,
- # or whatever), but I'm not sure leaving CC as cc is any better...
- #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
- # Used to have BISON=yacc.
- tentative_cc=gcc
- ;;
- m88k-dg-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- ;;
- m88k-harris-cxux*)
- # Under CX/UX, we want to tell the compiler to use ANSI mode.
- tentative_cc="cc -Xa"
- host_makefile_frag="config/mh-cxux"
- ;;
- m88k-motorola-sysv*)
- ;;
- mips*-dec-ultrix*)
- tentative_cc="cc -Wf,-XNg1000"
- host_makefile_frag="config/mh-decstation"
- ;;
- mips*-nec-sysv4*)
- # The C compiler on NEC MIPS SVR4 needs bigger tables.
- tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
- host_makefile_frag="config/mh-necv4"
- ;;
- mips*-sgi-irix4*)
- # Tell compiler to use K&R C. We can't compile under the SGI Ansi
- # environment. Also bump switch table size so that cp-parse will
- # compile. Bump string length limit so linker builds.
- tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
- ;;
- mips*-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- mips*-*-sysv*)
- # This is for a MIPS running RISC/os 4.52C.
-
- # This is needed for GDB, but needs to be in the top-level make because
- # if a library is compiled with the bsd headers and gets linked with the
- # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
- # a different size).
- # ptrace(2) apparently has problems in the BSD environment. No workaround is
- # known except to select the sysv environment. Could we use /proc instead?
- # These "sysv environments" and "bsd environments" often end up being a pain.
- #
- # This is not part of CFLAGS because perhaps not all C compilers have this
- # option.
- tentative_cc="cc -systype sysv"
- ;;
- i370-ibm-opened*)
- tentative_cc="c89"
- ;;
- i[[3456789]]86-*-sysv5*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[[3456789]]86-*-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- host_makefile_frag="config/mh-dgux386"
- ;;
- i[[3456789]]86-ncr-sysv4.3*)
- # The MetaWare compiler will generate a copyright message unless you
- # turn it off by adding the -Hnocopyr flag.
- tentative_cc="cc -Hnocopyr"
- ;;
- i[[3456789]]86-ncr-sysv4*)
- # for an NCR 3000 (i486/SVR4) system.
- # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
- # This compiler not only emits obnoxious copyright messages every time
- # you run it, but it chokes and dies on a whole bunch of GNU source
- # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
- tentative_cc="/usr/ccs/ATT/cc"
- host_makefile_frag="config/mh-ncr3000"
- ;;
- i[[3456789]]86-*-sco3.2v5*)
- ;;
- i[[3456789]]86-*-sco*)
- # The native C compiler botches some simple uses of const. Unfortunately,
- # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
- tentative_cc="cc -Dconst="
- host_makefile_frag="config/mh-sco"
- ;;
- i[[3456789]]86-*-udk*)
- host_makefile_frag="config/mh-sysv5"
- ;;
i[[3456789]]86-*-solaris2*)
host_makefile_frag="config/mh-sysv4"
;;
@@ -1163,37 +1054,23 @@ case "${host}" in
*-interix*)
host_makefile_frag="config/mh-interix"
;;
- vax-*-ultrix2*)
- # The old BSD pcc isn't up to compiling parts of gdb so use gcc
- tentative_cc=gcc
- ;;
*-*-solaris2*)
host_makefile_frag="config/mh-solaris"
;;
- m68k-sun-sunos*)
- # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
- # without overflowing the jump tables (-J says to use a 32 bit table)
- tentative_cc="cc -J"
- ;;
hppa*-hp-hpux10*)
tentative_cc="cc -Wp,-H256000"
host_makefile_frag="config/mh-pa-hpux10"
;;
- hppa*-hp-hpux* | hppa*-*-hiux*)
+ hppa*-hp-hpux*)
tentative_cc="cc -Wp,-H256000"
host_makefile_frag="config/mh-pa"
;;
hppa*-*)
host_makefile_frag="config/mh-pa"
;;
- *-hp-hpux* | *-*-hiux*)
+ *-hp-hpux*)
tentative_cc="cc -Wp,-H256000"
;;
- rs6000-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/usr/cygnus/progressive/bin/gcc"
- host_makefile_frag="config/mh-lynxrs6k"
- ;;
*-*-darwin*)
host_makefile_frag="config/mh-darwin"
;;
@@ -1207,9 +1084,6 @@ case "${host}" in
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
;;
- *-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
# This is placed last to prevent interfering with the cases above.
i[[3456789]]86-*-*)
# Build the stage2 and stage3 compilers with -fomit-frame-pointer.
@@ -2560,7 +2434,7 @@ esac
# Decide which environment variable is used to find dynamic libraries.
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
- *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
--
GitLab