dhcpcd: failed to bind udp - No such device (os error 19)
Created by: jlj2
-
I agree that I have searched opened and closed issues to prevent duplicates.
Description
Boot up stopped with the above error today when booting from BIOS using a USB stick with a Redox iso dd'd onto it.
Environment info
Booted from my x86_64 HP Pavilion G6-2288ca Notebook (CPU: AMD A10 Aruba piledriver; with Radeon Graphics). My router was turned on and plugged in, with only ethernet turned on; wifi is disabled in the router settings.
- Redox OS Release: 0.3.4
Note 1: In case this is relevant, one of my USB jacks (USB 2.0?) was damaged when my notebook fell to the ground years ago; sometimes, I can plug in an expansion backup drive and it works there sometimes, with some OS's. There is another USB (2.0?) available and operational, but the Redox USB stick was plugged into the only USB 3.0 jack. Notably, also, the battery hardly retains power.
Note 2: My BIOS has never been knowingly updated since the notebook was produced in 2012. I wonder whether it has been hacked into at some point.
Steps to reproduce
Redox bootup began by asking for the resolution. When I selected Redox's offered default (1152x86@32), I quickly got a black but backlit screen with various standing red blocks, each the size of a 12-point character, with a black flashing colon symbol inside many/all(?) of them.
My Linux OS (Alpine Linux) usually chooses 1366x768 for the inbuilt monitor, as described by arandr. If I chose 1366x768@32 resolution at Redox bootup, the characters at bootup are 'squashed' to 'smithereens' strewn in numerous diagonals across the screen.
If I choose 1024x768@32 resolution instead on bootup, bootup continues but then stops; that log is partly transcribed below:
4000D Speaker Unknown Internal NA
[...]
IHDA: Deallocating IHDA Driver
[...]
Addr: 00:0E, Type: VendorDefined: Inputs:0.4.C7 [not sure of those last characters were properly written down]
PCI 02/00/01 1814:3298 0D.11.00.00 wireless 0=F0200000
0011: MicIn Unknown Internal Top
[...]
rand: unseeded
[...]
ethernetd: opening network
Addr: 00:21 Type: BeepGenerator, Inputs: 0: []
ethernetd: failed to open network: No such device
Addr: 00:22 Type: VendorDefined, Inputs: 0: []
IHDA: Initialization finished.
ipd: opening ethernet: 806
ipd: failed to open ethernet 806: No such device
icompd: opening ip:1:
icompd: failed to open ip:1 : syscall error: No such device
tcpd: opening ip:6
tcpd: failed to open ip:6 : No such device
udpd: opening ip:11
udpd: failed to open ip:11 : No such device
DHCP: MAC: 54-52-00-AB-CD-EF Current IP: 10.0.2.15
dhcpcd: failed to bind udp - No such device (os error 19)
Optional references
Related to:
- Another issue to be uploaded shortly: #1122 (closed); there were other kinds of error messages, both occurring when booting Redox during another session -
panicked at PCI 00/18/01
[...];IHDA: No output pins?!
when also selecting resolution 1024x768@32, but when starting up after a long session on another Linux operating system (perhaps due to the notebook being too warm? As noted above, the battery hardly retains power).