Newer
Older
/* This probably needs more porting work to ppc64. */
# if defined(GC_DARWIN_THREADS)
/* From "Inside Mac OS X - Mach-O Runtime Architecture" published by Apple
Page 49:
"The space beneath the stack pointer, where a new stack frame would normally
be allocated, is called the red zone. This area as shown in Figure 3-2 may
be used for any purpose as long as a new stack frame does not need to be
added to the stack."
Page 50: "If a leaf procedure's red zone usage would exceed 224 bytes, then
it must set up a stack frame just like routines that call other routines."
*/
#ifdef POWERPC
# if CPP_WORDSZ == 32
# define PPC_RED_ZONE_SIZE 224
# elif CPP_WORDSZ == 64
# define PPC_RED_ZONE_SIZE 320
# endif
#endif
typedef struct StackFrame {
unsigned long savedSP;
unsigned long savedCR;
unsigned long savedLR;
unsigned long reserved[2];
unsigned long savedRTOC;
} StackFrame;
unsigned long FindTopOfStack(unsigned int stack_start) {
StackFrame *frame;
if (stack_start == 0) {
# ifdef POWERPC
# if CPP_WORDSZ == 32
__asm__ volatile("lwz %0,0(r1)" : "=r" (frame));
# else
__asm__ volatile("ld %0,0(r1)" : "=r" (frame));
} else {
frame = (StackFrame *)stack_start;
}
# ifdef DEBUG_THREADS
/* GC_printf1("FindTopOfStack start at sp = %p\n", frame); */
# endif
do {
/* if there are no more stack frames, stop */
frame = (StackFrame*)frame->savedSP;
/* we do these next two checks after going to the next frame
because the LR for the first stack frame in the loop
is not set up on purpose, so we shouldn't check it. */
if ((frame->savedLR & ~3) == 0) break; /* if the next LR is bogus, stop */
if ((~(frame->savedLR) & ~3) == 0) break; /* ditto */
} while (1);
# ifdef DEBUG_THREADS
/* GC_printf1("FindTopOfStack finish at sp = %p\n", frame); */
# endif
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
#ifdef DARWIN_DONT_PARSE_STACK
void GC_push_all_stacks() {
int i;
kern_return_t r;
GC_thread p;
pthread_t me;
ptr_t lo, hi;
ppc_thread_state_t state;
mach_msg_type_number_t thread_state_count = MACHINE_THREAD_STATE_COUNT;
me = pthread_self();
if (!GC_thr_initialized) GC_thr_init();
for(i=0;i<THREAD_TABLE_SZ;i++) {
for(p=GC_threads[i];p!=0;p=p->next) {
if(p -> flags & FINISHED) continue;
if(pthread_equal(p->id,me)) {
lo = GC_approx_sp();
} else {
/* Get the thread state (registers, etc) */
r = thread_get_state(
p->stop_info.mach_thread,
MACHINE_THREAD_STATE,
(natural_t*)&state,
&thread_state_count);
if(r != KERN_SUCCESS) ABORT("thread_get_state failed");
lo = (void*)(state.r1 - PPC_RED_ZONE_SIZE);
GC_push_one(state.r0);
GC_push_one(state.r2);
GC_push_one(state.r3);
GC_push_one(state.r4);
GC_push_one(state.r5);
GC_push_one(state.r6);
GC_push_one(state.r7);
GC_push_one(state.r8);
GC_push_one(state.r9);
GC_push_one(state.r10);
GC_push_one(state.r11);
GC_push_one(state.r12);
GC_push_one(state.r13);
GC_push_one(state.r14);
GC_push_one(state.r15);
GC_push_one(state.r16);
GC_push_one(state.r17);
GC_push_one(state.r18);
GC_push_one(state.r19);
GC_push_one(state.r20);
GC_push_one(state.r21);
GC_push_one(state.r22);
GC_push_one(state.r23);
GC_push_one(state.r24);
GC_push_one(state.r25);
GC_push_one(state.r26);
GC_push_one(state.r27);
GC_push_one(state.r28);
GC_push_one(state.r29);
GC_push_one(state.r30);
GC_push_one(state.r31);
} /* p != me */
if(p->flags & MAIN_THREAD)
hi = GC_stackbottom;
else
hi = p->stack_end;
#if DEBUG_THREADS
GC_printf3("Darwin: Stack for thread 0x%lx = [%lx,%lx)\n",
(unsigned long) p -> id,
(unsigned long) lo,
(unsigned long) hi
);
#endif
GC_push_all_stack(lo,hi);
} /* for(p=GC_threads[i]...) */
} /* for(i=0;i<THREAD_TABLE_SZ...) */
}
#else /* !DARWIN_DONT_PARSE_STACK; Use FindTopOfStack() */
mach_port_t me;
thread_act_array_t act_list = 0;
mach_msg_type_number_t listcount = 0;
me = mach_thread_self();
r = task_threads(current_task(), &act_list, &listcount);
if(r != KERN_SUCCESS) ABORT("task_threads failed");
for(i = 0; i < listcount; i++) {
thread_act_t thread = act_list[i];
if (thread == me) {
lo = GC_approx_sp();
hi = (ptr_t)FindTopOfStack(0);
} else {
ppc_thread_state_t info;
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
mach_msg_type_number_t outCount = THREAD_STATE_MAX;
r = thread_get_state(thread, MACHINE_THREAD_STATE,
(natural_t *)&info, &outCount);
if(r != KERN_SUCCESS) ABORT("task_get_state failed");
lo = (void*)(info.r1 - PPC_RED_ZONE_SIZE);
hi = (ptr_t)FindTopOfStack(info.r1);
GC_push_one(info.r0);
GC_push_one(info.r2);
GC_push_one(info.r3);
GC_push_one(info.r4);
GC_push_one(info.r5);
GC_push_one(info.r6);
GC_push_one(info.r7);
GC_push_one(info.r8);
GC_push_one(info.r9);
GC_push_one(info.r10);
GC_push_one(info.r11);
GC_push_one(info.r12);
GC_push_one(info.r13);
GC_push_one(info.r14);
GC_push_one(info.r15);
GC_push_one(info.r16);
GC_push_one(info.r17);
GC_push_one(info.r18);
GC_push_one(info.r19);
GC_push_one(info.r20);
GC_push_one(info.r21);
GC_push_one(info.r22);
GC_push_one(info.r23);
GC_push_one(info.r24);
GC_push_one(info.r25);
GC_push_one(info.r26);
GC_push_one(info.r27);
GC_push_one(info.r28);
GC_push_one(info.r29);
GC_push_one(info.r30);
GC_push_one(info.r31);
# else
/* FIXME: Remove after testing: */
WARN("This is completely untested and likely will not work\n", 0);
i386_thread_state_t info;
mach_msg_type_number_t outCount = THREAD_STATE_MAX;
r = thread_get_state(thread, MACHINE_THREAD_STATE,
(natural_t *)&info, &outCount);
if(r != KERN_SUCCESS) ABORT("task_get_state failed");
lo = (void*)info.esp;
hi = (ptr_t)FindTopOfStack(info.esp);
GC_push_one(info.eax);
GC_push_one(info.ebx);
GC_push_one(info.ecx);
GC_push_one(info.edx);
GC_push_one(info.edi);
GC_push_one(info.esi);
/* GC_push_one(info.ebp); */
/* GC_push_one(info.esp); */
GC_push_one(info.ss);
GC_push_one(info.eip);
GC_push_one(info.cs);
GC_push_one(info.ds);
GC_push_one(info.es);
GC_push_one(info.fs);
GC_push_one(info.gs);
# endif /* !POWERPC */
}
# if DEBUG_THREADS
GC_printf3("Darwin: Stack for thread 0x%lx = [%lx,%lx)\n",
(unsigned long) thread,
(unsigned long) lo,
(unsigned long) hi
);
# endif
GC_push_all_stack(lo, hi);
} /* for(p=GC_threads[i]...) */
}
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
static mach_port_t GC_mach_handler_thread;
static int GC_use_mach_handler_thread = 0;
static struct GC_mach_thread GC_mach_threads[THREAD_TABLE_SZ];
static int GC_mach_threads_count;
void GC_stop_init() {
int i;
for (i = 0; i < THREAD_TABLE_SZ; i++) {
GC_mach_threads[i].thread = 0;
GC_mach_threads[i].already_suspended = 0;
}
GC_mach_threads_count = 0;
}
/* returns true if there's a thread in act_list that wasn't in old_list */
int GC_suspend_thread_list(thread_act_array_t act_list, int count,
thread_act_array_t old_list, int old_count) {
mach_port_t my_thread = mach_thread_self();
int i, j;
int changed = 0;
for(i = 0; i < count; i++) {
thread_act_t thread = act_list[i];
# if DEBUG_THREADS
GC_printf1("Attempting to suspend thread %p\n", thread);
# endif
/* find the current thread in the old list */
int found = 0;
for(j = 0; j < old_count; j++) {
thread_act_t old_thread = old_list[j];
if (old_thread == thread) {
found = 1;
break;
}
}
if (!found) {
/* add it to the GC_mach_threads list */
GC_mach_threads[GC_mach_threads_count].thread = thread;
/* default is not suspended */
GC_mach_threads[GC_mach_threads_count].already_suspended = 0;
changed = 1;
}
if (thread != my_thread &&
(!GC_use_mach_handler_thread
|| (GC_use_mach_handler_thread
&& GC_mach_handler_thread != thread))) {
struct thread_basic_info info;
mach_msg_type_number_t outCount = THREAD_INFO_MAX;
kern_return_t kern_result = thread_info(thread, THREAD_BASIC_INFO,
(thread_info_t)&info, &outCount);
if(kern_result != KERN_SUCCESS) {
/* the thread may have quit since the thread_threads () call
* we mark already_suspended so it's not dealt with anymore later
*/
if (!found) {
GC_mach_threads[GC_mach_threads_count].already_suspended = TRUE;
GC_mach_threads_count++;
}
continue;
}
# if DEBUG_THREADS
GC_printf2("Thread state for 0x%lx = %d\n", thread, info.run_state);
# endif
if (!found) {
GC_mach_threads[GC_mach_threads_count].already_suspended = info.suspend_count;
}
if (info.suspend_count) continue;
# if DEBUG_THREADS
GC_printf1("Suspending 0x%lx\n", thread);
# endif
/* Suspend the thread */
kern_result = thread_suspend(thread);
if(kern_result != KERN_SUCCESS) {
/* the thread may have quit since the thread_threads () call
* we mark already_suspended so it's not dealt with anymore later
*/
if (!found) {
GC_mach_threads[GC_mach_threads_count].already_suspended = TRUE;
GC_mach_threads_count++;
}
continue;
}
}
if (!found) GC_mach_threads_count++;
}
return changed;
/* Caller holds allocation lock. */
void GC_stop_world()
{
int i, changes;
mach_port_t my_thread = mach_thread_self();
thread_act_array_t act_list, prev_list;
mach_msg_type_number_t listcount, prevcount;
# if DEBUG_THREADS
GC_printf1("Stopping the world from 0x%lx\n", mach_thread_self());
# endif
/* clear out the mach threads list table */
GC_stop_init();
/* Make sure all free list construction has stopped before we start. */
/* No new construction can start, since free list construction is */
/* required to acquire and release the GC lock before it starts, */
/* and we have the lock. */
# ifdef PARALLEL_MARK
GC_acquire_mark_lock();
GC_ASSERT(GC_fl_builder_count == 0);
/* We should have previously waited for it to become zero. */
# endif /* PARALLEL_MARK */
/* Loop stopping threads until you have gone over the whole list
twice without a new one appearing. thread_create() won't
return (and thus the thread stop) until the new thread
exists, so there is no window whereby you could stop a
thread, recognise it is stopped, but then have a new thread
it created before stopping show up later.
*/
changes = 1;
prev_list = NULL;
prevcount = 0;
do {
int result;
kern_result = task_threads(current_task(), &act_list, &listcount);
result = GC_suspend_thread_list(act_list, listcount,
prev_list, prevcount);
changes = result;
prev_list = act_list;
prevcount = listcount;
} while (changes);
if(GC_incremental) {
# endif
# ifdef PARALLEL_MARK
GC_release_mark_lock();
# endif
#if DEBUG_THREADS
GC_printf1("World stopped from 0x%lx\n", my_thread);
#endif
}
/* Caller holds allocation lock, and has held it continuously since */
/* the world stopped. */
void GC_start_world()
{
mach_port_t my_thread = mach_thread_self();
int i, j;
GC_thread p;
kern_return_t kern_result;
thread_act_array_t act_list;
mach_msg_type_number_t listcount;
struct thread_basic_info info;
mach_msg_type_number_t outCount = THREAD_INFO_MAX;
# if DEBUG_THREADS
GC_printf0("World starting\n");
# endif
# ifdef MPROTECT_VDB
if(GC_incremental) {
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
kern_result = task_threads(current_task(), &act_list, &listcount);
for(i = 0; i < listcount; i++) {
thread_act_t thread = act_list[i];
if (thread != my_thread &&
(!GC_use_mach_handler_thread ||
(GC_use_mach_handler_thread && GC_mach_handler_thread != thread))) {
for(j = 0; j < GC_mach_threads_count; j++) {
if (thread == GC_mach_threads[j].thread) {
if (GC_mach_threads[j].already_suspended) {
# if DEBUG_THREADS
GC_printf1("Not resuming already suspended thread %p\n", thread);
# endif
continue;
}
kern_result = thread_info(thread, THREAD_BASIC_INFO,
(thread_info_t)&info, &outCount);
if(kern_result != KERN_SUCCESS) ABORT("thread_info failed");
# if DEBUG_THREADS
GC_printf2("Thread state for 0x%lx = %d\n", thread,
info.run_state);
GC_printf1("Resuming 0x%lx\n", thread);
# endif
/* Resume the thread */
kern_result = thread_resume(thread);
if(kern_result != KERN_SUCCESS) ABORT("thread_resume failed");
}
}
}
# if DEBUG_THREADS
GC_printf0("World started\n");
# endif
void GC_darwin_register_mach_handler_thread(mach_port_t thread) {
GC_mach_handler_thread = thread;
GC_use_mach_handler_thread = 1;